bio-rad伯乐 Trans-Blot 转印槽

bio-rad伯乐 Trans-Blot 转印槽

产品型号:

负责人:张先生

QQ:455729144

手机:13837159053

产品详情

 【介绍】
Trans-Blot 电泳转印槽组件
  1. 缓冲液槽及带有电缆的盖
  2. 凝胶支架转印夹
  3. 纤维衬垫
  4. 电极丝
  5. 电极板
  6. 特冷却芯 
     

Trans-Blot 转印槽是功能灵活的转印设备,可理想 地用于多种转印应用。Trans-Blot 转印槽特点包括:

  • 能进行多胶转印,可容纳3 块PROTEAN III xi 凝胶、6块Criterion 凝胶、12块Mini-PROTEAN 3 或Ready Gel 预制胶
  • 多组参数灵活可设,可调节的电压设置(从30 V 的 过夜转印到200 V 的1 小时快速实验)
  • 电极间距设置为8 cm 用于标准印迹杂交,或设置 为4cm 用于高强度印迹杂交
  • 可选择板式电极:涂有铂金的钛作为正极,不锈钢为负极,能提供高 强度电场和比其它电极更高的电流密度。或选择较经济的铂金电极丝
  • 通过特冷却芯和水循环仪来调节温度— 是天然酶(4°C)或高强 度转印的理想选择,随着转印时间增加(多达24 小时),不会引起 缓冲液耗竭(在高强度转印中必须使用冷却芯,也推荐用于板式 电极的应用)
  • 带铰链的凝胶支架转印夹能避免滑动,确保凝胶与印迹膜间的紧密接 触;每个转印夹都有颜色标记以保证在转印槽中的正确定位

Trans-Blot 转印槽的锁闭凝胶支架转印夹系统。转印夹(1)支撑凝胶(2)印迹膜(3)两侧有纤维 衬垫和滤纸(4)确保凝胶三明治内的完全接触。凝胶夹垂直插入缓冲液槽中(5)。

 

【技术指标】

大凝胶尺寸(W x L) 16 x 20 cm
缓冲液要求 2.5 L
凝胶容量 3 块PROTEAN II xi 凝胶、
6 块Criterion 凝胶、
12 块Mini-PROTEAN 3 凝胶、
12 块Ready Gel 预制胶
推荐电源 PowerPac HC 电源
尺寸(W x L x H) 18 x 9.5 x 24 cm

【订货信息】

目录 # 描述
Trans-Blot Cells and Systems
170-3825 Trans-Blot Cell With Wire Electrodes and PowerPac HC Power Supply, 100–120/220–240 V, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm), power supply, power cord, instructions
170-3850 Trans-Blot System With Plate Electrodes and PowerPac HC Power Supply, 100–120/220–240 V
170-3853 Trans-Blot System With Plate Electrodes, Super Cooling Coil, and PowerPac HC Power Supply, 100–120/220–240 V, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm), power supply, power cord, instructions
170-3910 Trans-Blot Cell With Wire Electrodes, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm)
170-3939 Trans-Blot Cell With Plate Electrodes and Super Cooling Coil, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm)
170-3946 Trans-Blot Cell With Plate Electrodes, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm)
Trans-Blot Cell Accessories
170-3912 Super Cooling Coil, required for all high-intensity transfers
170-3913 Gel Holder Cassette, includes 2 fiber pads
170-3914 Fiber Pads, 15.5 x 20.5 cm, 6
170-3920 Trans-Blot Standard Wire Electrode Card, cathode
170-3921 Trans-Blot Standard Wire Electrode Card, anode
170-3922 Trans-Blot Cell Buffer Tank
170-3923 Trans-Blot Cell Lid With Power Cables
170-3943 Trans-Blot Platinum Anode Plate Electrode
170-3944 Trans-Blot Stainless-Steel Cathode Plate Electrode
170-3945 Trans-Blot Plate Electrode Pair, platinum anode and stainless-steel cathode

您可以通过在线留言联系我们